tutorial 5 音视频同步初印象

### 同步视频基础时间戳 dts解码时间戳 pts显示时间戳 ### 动手实践目标 1. 想不想动手实践看看**p**ts第一次被赋值。 1. 重点研究那个video_fresh-timer函数 1. 鉴于分析的视频只有12帧， - 理解actual_delay 期望值 - Audio的时间 - 理解一下那个时间戳 **vs**音频时间的言论** 1. video_fresh-timer关注delay :（现在的时间戳-上一个时间戳）同步阈值两个变量 1. 提前告知 tutorial同步音频到视频， 1. 认识校正方法，是修正delay,要么加倍延迟，要么没有延迟。下一节对于音频来说，要么插值，要么删减？一句话，同步的手段各有。 ### 表面变化：代码变化（tutorial 4 vs tutorial 5）增加的宏如下： ~~~ #define AV_SYNC_THRESHOLD 0.010 //minimum sync time #define AV_NOSYNC_THRESHOLD 10 //the differ of video and audio exceeds the time, do not sync with audio ~~~ 值得注意的数据结构变化如下： ~~~ struct VideoState{ ... double video_clock; double audio_clock; double frame_last_pts; double frame_last_delay; double frame_timer; } VideoState; ~~~ 关于音频当前时钟字段，暂时忽略，详见官方tutorial ### 视频线程代码及变迁 ~~~ int video_thread(void *arg) { VideoState *is = (VideoState *) arg; AVPacket pkt1, *packet = &pkt1; int len1, frameFinished; AVFrame *pFrame; double pts = 0; pFrame = avcodec_alloc_frame(); for (;;) { if (packet_queue_get(&is->videoq, packet, 1) < 0) { // means we quit getting packets break; } pts = 0; //save global pts to be stored in pFrame in first call global_video_pkt_pts = packet->pts; // printf("packet->pts %d\n", packet->pts ); // printf("packet->dts %d\n", packet->dts ); // Decode video frame len1 = avcodec_decode_video2(is->video_st->codec, pFrame, &frameFinished, packet); if (packet->dts == AV_NOPTS_VALUE && pFrame->opaque && *(uint64_t*) pFrame->opaque != AV_NOPTS_VALUE) { pts = *(uint64_t*) pFrame->opaque; } else if (packet->dts != AV_NOPTS_VALUE) { pts = packet->dts; } else { pts = 0; } // printf("pts %d\n", pts ); pts *= av_q2d(is->video_st->time_base); // Did we get a video frame? if (frameFinished) { pts = synchronize_video(is, pFrame, pts); if (queue_picture(is, pFrame, pts) < 0) { break; } } av_free_packet(packet); } av_free(pFrame); return 0; } ~~~ 差别有如下： Pts值的初始化,详细如下图图中红色部分是额外添加的dts处理 ![](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2016-02-22_56cae4b827038.jpg) 下图中表明还有视频同步函数的加入。 ![](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2016-02-22_56cae4b839dea.jpg) 以上是所有的两处大的修改。 ### 视频刷新定时器video_refresh_timer 一句话：请看英文解释，一次性解释清楚 <table border="1" cellspacing="0" cellpadding="7" width="569"><colgroup><col width="553"/></colgroup><tbody><tr><td valign="top" width="553">void video_refresh_timer(void *userdata) { VideoState *is = (VideoState *) userdata;VideoPicture *vp;double actual_delay, delay, sync_threshold, ref_clock, diff; if (is->video_st) {if (is->pictq_size == 0) {schedule_refresh(is, 1);} else {vp = &is->pictq[is->pictq_rindex]; /* Timing code goes here */delay = vp->pts - is->frame_last_pts; //the pts from lastif (delay <= 0 || delay >= 1.0) {//if incorrect delay, use previous one过大或者多小，超过1s,不过理喻delay = is->frame_last_delay;}/* save for next time */is->frame_last_delay = delay;is->frame_last_pts = vp->pts; /* update delay to sync to audio */ref_clock = get_audio_clock(is);diff = vp->pts - ref_clock; /* Skip or repeat the frame. Take delay into accountFFPlay still doesn't "know if this is the best guess." */sync_threshold = (delay > AV_SYNC_THRESHOLD) ? delay: AV_SYNC_THRESHOLD;if (fabs(diff) < AV_NOSYNC_THRESHOLD) {if (diff <= -sync_threshold) {delay = 0;//video is slow, do not delay，视频已太慢（视频预测时间-当前时间都是负值，请赶紧播）} else if (diff >= sync_threshold)delay = 2 * delay;//video is fast, delay double，视频太快，刷新时间变慢点}}is->frame_timer += delay;/* computer the REAL delay */actual_delay = is->frame_timer - (av_gettime() / 1000000.0);if (actual_delay < 0.010) {/* Really it should skip the picture instead */actual_delay = 0.010;}schedule_refresh(is, (int) (actual_delay * 1000 + 0.5));// schedule_refresh(is, 80); /* show the picture! */video_display(is); /* update queue for next picture! */后续略} </td></tr></tbody></table> ### 实验结果分析， #### Video_thread代码： #### 所有亮点都在颜色里。 Video_thread{ ~~~ Video_thread{ ... if (packet->dts == AV_NOPTS_VALUE && pFrame->opaque && *(uint64_t*) pFrame->opaque != AV_NOPTS_VALUE) { pts = *(uint64_t*) pFrame->opaque; } else if (packet->dts != AV_NOPTS_VALUE) { pts = packet->dts;//12帧测试案列执行此代码覆盖 } else { pts = 0; } pts *= av_q2d(is->video_st->time_base); // Did we get a video frame? if (frameFinished) { pts = synchronize_video(is, pFrame, pts); //除第一帧没有pts赋值，其他帧都有赋值。其他备注本案例没有重复帧， if (queue_picture(is, pFrame, pts) < 0) { break; } } } ~~~ ### video_refresh_timer代码运行结果这里的数据结果较多，尤其替换了上一小节定时刷新，值得反复体会。 ~~~ void video_refresh_timer(void *userdata) { ... if (is->video_st) { if (is->pictq_size == 0) { } else { vp = &is->pictq[is->pictq_rindex]; /* Timing code goes here */ delay = vp->pts - is->frame_last_pts; //the pts from last //实验结果非常理想，所有12帧处理的结果都是1.0 if (delay <= 0 || delay >= 1.0) { //if incorrect delay, use previous one delay= is->frame_last_delay; } /* save for next time */ is->frame_last_delay = delay; is->frame_last_pts = vp->pts; /* update delay to sync to audio */ ref_clock = get_audio_clock(is); diff = vp->pts - ref_clock;//具体的值见下面的表格 /* Skip or repeat the frame. Take delay into account FFPlay still doesn't "know if this is the best guess." */ sync_threshold = (delay > AV_SYNC_THRESHOLD) ? delay : AV_SYNC_THRESHOLD; if (fabs(diff) < AV_NOSYNC_THRESHOLD) { if (diff <= -sync_threshold) { delay = 0; //video is slow, do not delay //实验结果非常理想，都是说明视频太慢， } else if (diff >= sync_threshold) { delay = 2 * delay; //video is fast, delay double } } is->frame_timer += delay;//鉴于12帧delay=0，这个值就没有增长过 /* computer the REAL delay */ actual_delay = is->frame_timer - (av_gettime() / 1000000.0); if (actual_delay < 0.010) {//详细的真实delay数据如下，可见都是大大小于阈值 /* Really it should skip the picture instead */ actual_delay = 0.010; } logtime=actual_delay * 1000 + 0.5; schedule_refresh(is, (int) (actual_delay * 1000 + 0.5));//所有填入的时间都是10.5 // schedule_refresh(is, 80); /* show the picture! */ video_display(is); //ingore the the other code } } else { schedule_refresh(is, 100); } } ~~~ ### 12帧的时延分析表格，对于所有12帧的delay初步结果分析，可以看到所有的帧都太慢，不执行delay.**但是视觉上看来，视频帧还是太慢**，这说明音频还得同视频同步，期待下一小节。 <table border="1" cellspacing="0" cellpadding="7" width="569"><colgroup><col width="553"/></colgroup><tbody><tr><td valign="top" width="553">// 10 //the differ of video and audio exceeds the time, do not sync with audio// if(diff <= -sync_threshold)所有出现的sync_threshold都是0.04diff=-2.0393626991565137, //video is slow, do not delay，diff=-5.8978444236176193, //video is slow, do not delay，diff=-9.8762886597938149, //video is slow, do not delay，diff=-8.9662605435801321, //video is slow, do not delay，diff=-7.9662605435801321, //video is slow, do not delay，diff=-6.9662605435801321, //video is slow, do not delay，diff=-5.9662605435801321, //video is slow, do not delay，diff=-4.9662605435801321, //video is slow, do not delay，diff=-3.9662605435801321, //video is slow, do not delay，diff=-2.9662605435801321, //video is slow, do not delay，diff=-1.9662605435801321, //video is slow, do not delay，diff=-0.96626054358013214, //video is slow, do not delay</td></tr></tbody></table> 在计算真实的delay时，涉及到的表格如下， <table border="1" cellspacing="0" cellpadding="7" width="569"><colgroup><col width="553"/></colgroup><tbody><tr><td valign="top" width="553">actual_delay= -3.2161841392517090 ,frame_timer= 1401626707.2479169actual_delay= -8.3304760456085205 ,frame_timer= 1401626707.2479169actual_delay= -13.639780044555664 ,frame_timer= 1401626707.2479169actual_delay= -14.218813180923462 ,frame_timer= 1401626707.2479169actual_delay= -14.572834014892578 ,frame_timer= 1401626707.2479169actual_delay= -14.932854175567627 ,frame_timer= 1401626707.2479169actual_delay= -15.305875062942505 ,frame_timer= 1401626707.2479169actual_delay= -15.662896156311035 ,frame_timer= 1401626707.2479169actual_delay= -16.020915985107422 ,frame_timer= 1401626707.2479169actual_delay= -16.381937026977539 ,frame_timer= 1401626707.2479169actual_delay= -16.737957000732422 ,frame_timer= 1401626707.2479169actual_delay= -16.947968959808350 ,frame_timer= 1401626707.2479169 </td></tr></tbody></table> ## 其他：当播放结束，没有额外的多调用刷屏函数，不像上一个版本。结果中，也有多线程的随机性出现，情况在预料之中。未完成分析日志log的一轮起始，下次补充就是。现在认识依然很浅，比如i b b p的认识 ## 小结：逻辑很复杂，测试用例很理想，入门在路上。不要忘了英文注释不要忘了。。视频即使同步了，也比音频慢！！回顾，主要是看vedio_thread ,和播放的timer ### 附件完整log分析简化版（没有带修正的log） Function: video_thread(void *), [pts 2]=0 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=0.00000000000000000 Function: video_refresh_timer(void *), pts之delay=0.00000000000000000 Function: video_refresh_timer(void *), diff=-2.0393626991565137, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=1 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=1.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-5.8978444236176193, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=2 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=2.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-9.8762886597938149, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=3 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=3.0000000000000000 Function: video_thread(void *), [pts 2]=4 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=4.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-8.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=5 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=5.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-7.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=6 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=6.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-6.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=7 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=7.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-5.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=8 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=8.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-4.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=9 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=9.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-3.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=10 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=10.000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-2.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=11 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=11.000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-1.9662605435801321, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-0.96626054358013214, //video is slow, do not delay Function: video_refresh_timer(void *),【core time】=10.500000000000000 ### 最终用到的log Function: our_get_buffer(AVCodecContext *, AVFrame *),pts初始化in自定义alloc，pts=0 Function: video_thread(void *), [pts 2]=0 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we aren't given a pts, set it to the clock */, 0.00000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=0.00000000000000000 Function: video_refresh_timer(void *), pts之delay=0.00000000000000000 Function: video_refresh_timer(void *), diff=-2.0393626991565137, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -3.2161841392517090 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=1 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 1.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=1.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-5.8978444236176193, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -8.3304760456085205 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=2 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 2.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=2.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-9.8762886597938149, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -13.639780044555664 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=3 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 3.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=3.0000000000000000 Function: video_thread(void *), [pts 2]=4 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 4.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=4.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-8.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -14.218813180923462 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=5 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 5.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=5.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-7.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -14.572834014892578 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=6 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 6.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=6.0000000000000000 Function: video_refresh_timer(void *), diff=-6.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -14.932854175567627 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=7 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 7.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=7.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-5.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -15.305875062942505 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=8 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 8.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=8.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-4.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -15.662896156311035 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=9 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 9.0000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=9.0000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-3.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -16.020915985107422 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=10 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 10.000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=10.000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-2.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -16.381937026977539 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_thread(void *), [pts 2]=11 Function: synchronize_video(VideoState *, AVFrame *, double), /* if we have pts, set video clock to it */ 11.000000000000000 Function: video_thread(void *),【pts同步后？,经过计算重复帧等】=11.000000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-1.9662605435801321, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -16.737957000732422 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000 Function: video_refresh_timer(void *), pts之delay=1.0000000000000000 Function: video_refresh_timer(void *), diff=-0.96626054358013214, //video is slow, do not delay，0.040000000000000001 must>=10ms Function: video_refresh_timer(void *), /* computer the REAL delay */ actual_delay= -16.947968959808350 ,frame_timer= 1401626707.2479169 Function: video_refresh_timer(void *),【core time】=10.500000000000000

tutorial 5 音视频同步 初印象