第11章 Using the Gradle Command-Line 使用 Gradle 命令行

最后更新于:2022-04-01 02:32:45

本章介绍了 Gradle 命令行的基本知识。正如在前面的章节里你所见到的, 调用 gradle 命令来执行构建。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#111-executing-multiple-tasks-执行多-task)11.1\. Executing multiple tasks 执行多 task 同个构建可以执行多个 task ,通过再命令行 列出每个 task。举例,命令 `gradle compile test` 将会执行 compile 和 test 两个 task。 Gradle 将会按顺序执行 命令行每个列出的 task,并且执行每个 task 的依赖。每个任务仅执行一次,不管它是如何被包含在构建中:无论是在命令行中指定,或作为另一个 task 的依赖,或两者都是。让我们看一个例子。 下面定义了4个 task。 dist 和 test 都依赖于 compile 。执行 `gradle dist test` ,compile 将会仅仅被执行一次。 Figure 11.1\. Task dependencies [![](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2015-08-19_55d480a70ada7.jpg)](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2015-08-19_55d480a70ada7.jpg) Example 11.1\. Executing multiple tasks build.gradle ~~~ task compile << { println 'compiling source' } task compileTest(dependsOn: compile) << { println 'compiling unit tests' } task test(dependsOn: [compile, compileTest]) << { println 'running unit tests' } task dist(dependsOn: [compile, test]) << { println 'building the distribution' } ~~~ 执行 gradle dist test 输出 ~~~ > gradle dist test :compile compiling source :compileTest compiling unit tests :test running unit tests :dist building the distribution BUILD SUCCESSFUL Total time: 1 secs ~~~ 每个 task 只执行一次,所以 `gradle test test` 跟 `gradle test` 执行结果一样。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#112-excluding-tasks-排除-task)11.2\. Excluding tasks 排除 task 可以通过 -x 命令行来排除 task 被执行。如下: Example 11.2\. Excluding tasks 执行 gradle dist -x test 输出 ~~~ > gradle dist -x test :compile compiling source :dist building the distribution BUILD SUCCESSFUL ~~~ Total time: 1 secs 可以看到 ,test 并未执行,即使它是 dist 的依赖。同时注意到, test 的依赖,如 compileTest 也未执行。这些 test 的依赖如果是被其他 task 所需要的话,如 compile 仍会执行。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#113-continuing-the-build-when-a-failure-occurs-发生故障时继续构建)11.3\. Continuing the build when a failure occurs 发生故障时继续构建 默认情况下,只要任何 task 失败,Gradle 将中止执行。这使得构建更快地完成,但隐藏了其他可能发生的故障。为了发现在一个单一的构建中多个可能发生故障的地方,你可以使用 --continue 选项。 通过执行 --continue ,Gralde 会执行每一个 task ,当那个 task 所有的依赖都无故障的执行完成, 而不是一旦出现错误就会中断执行。所有故障信息都会在最后报告出来。 一旦某个 task 执行失败,那么所有依赖于该 task 的后面的 task 都不会被执行,因为这样做不安全。例如,在测试时,当编译代码失败则测试不会执行。因为 测试 task 将取决于 编译 task(不管是直接或间接)。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#114-task-name-abbreviation-任务名称缩写)11.4\. Task name abbreviation 任务名称缩写 当你试图执行某个 task 的时候,无需输入 task 的全名.只需提供足够的可以唯一区分出该 task 的字符即可。例如,上面的例子你也可以这么写, 用 `gradle di` 来直接调用 dist 。 Example 11.3\. Abbreviated task name 执行 gradle di ~~~ > gradle di :compile compiling source :compileTest compiling unit tests :test running unit tests :dist building the distribution BUILD SUCCESSFUL Total time: 1 secs ~~~ 同时也可以应用在驼峰的 task 名称。如,执行 compileTest 时,运行 gradle compTest 或者 gradle cT 都可以。 Example 11.4\. Abbreviated camel case task name 执行 gradle cT ~~~ > gradle cT :compile compiling source :compileTest compiling unit tests BUILD SUCCESSFUL Total time: 1 secs ~~~ 同时,也可以应用在 -x 命令选项。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#115-selecting-which-build-to-execute-选择要执行的构建)11.5\. Selecting which build to execute 选择要执行的构建 调用 gradle 命令时,默认情况下总是会在当前目录下寻找构建文件(译者注:首先会寻找当前目录下的 build.gradle 文件,以及根据settings.gradle 中的配置寻找子项目的 build.gradle )。 可以使用 -b 参数选择其他的构建文件,并且当你使用此参数时 settings.gradle 将不会被使用,看下面的例子: Example 11.5\. Selecting the project using a build file subdir/myproject.gradle ~~~ task hello << { println "using build file '$buildFile.name' in '$buildFile.parentFile.name'." } ~~~ 执行 gradle -q -b subdir/myproject.gradle hello 输出 ~~~ > gradle -q -b subdir/myproject.gradle hello using build file 'myproject.gradle' in 'subdir'. ~~~ 或者,您可以使用 -p 选项来指定要使用的项目目录。多 project 的构建时应使用 -p 选项来代替 -b 选项。 Example 11.6\. Selecting the project using project directory 执行 gradle -q -p subdir hello 输出 ~~~ > gradle -q -p subdir hello using build file 'build.gradle' in 'subdir'. ~~~ ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#116-obtaining-information-about-your-build-获取构建信息)11.6\. Obtaining information about your build 获取构建信息 Gradle 提供了许多内置 task 来收集构建信息。这些内置 task 对于了解依赖结构以及解决问题都是很有帮助的. 了解更多,可以参阅[Chapter 41\. The Project Report Plugin 关于 Project Report 插件](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2041.%20The%20Project%20Report%20Plugin%20%E5%85%B3%E4%BA%8E%20Project%20Report%20%E6%8F%92%E4%BB%B6.md),可以为你的项目添加构建报告 ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1161-listing-projects--项目列表)11.6.1\. Listing projects 项目列表 执行 `gradle projects` 会为你列出选中项目的子项目列表.如下例. Example 11.7\. Obtaining information about projects 执行 gradle -q projects 输出 ~~~ > gradle -q projects ------------------------------------------------------------ Root project ------------------------------------------------------------ Root project 'projectReports' +--- Project ':api' - The shared API for the application \--- Project ':webapp' - The Web application implementation To see a list of the tasks of a project, run gradle <project-path>:tasks For example, try running gradle :api:tasks ~~~ 这份报告展示了每个项目的描述信息。当然你可以在项目中用 description属性来指定这些描述信息。 Example 11.8\. Providing a description for a project build.gradle ~~~ description = 'The shared API for the application' ~~~ ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1162-listing-tasks-任务列表)11.6.2\. Listing tasks 任务列表 执行 `gradle tasks` 会列出项目中所有 task。这份报告显示项目中所有的默认 task 以及每个 task 的描述。如下 Example 11.9\. Obtaining information about tasks 执行 gradle -q tasks 输出 ~~~ > gradle -q tasks ------------------------------------------------------------ All tasks runnable from root project ------------------------------------------------------------ Default tasks: dists Build tasks ----------- clean - Deletes the build directory (build) dists - Builds the distribution libs - Builds the JAR Build Setup tasks ----------------- init - Initializes a new Gradle build. [incubating] wrapper - Generates Gradle wrapper files. [incubating] Help tasks ---------- components - Displays the components produced by root project 'projectReports'. [incubating] dependencies - Displays all dependencies declared in root project 'projectReports'. dependencyInsight - Displays the insight into a specific dependency in root project 'projectReports'. help - Displays a help message. projects - Displays the sub-projects of root project 'projectReports'. properties - Displays the properties of root project 'projectReports'. tasks - Displays the tasks runnable from root project 'projectReports' (some of the displayed tasks may belong to subprojects). To see all tasks and more detail, run with --all. ~~~ 默认情况下,这只会显示那些被分组的 task.你可以通过为 task 设置group 属性和 description 来把这些信息展示到报告中 Example 11.10\. Changing the content of the task report build.gradle ~~~ dists { description = 'Builds the distribution' group = 'build' } ~~~ 当然你也可以用 --all 参数来收集更多 task 信息。这报告列出项目中所有被主 task 的分组的 task 以及 task 之间的依赖关系。下面是示例 Example 11.11\. Obtaining more information about tasks 执行 gradle -q tasks --all 输出 ~~~ > gradle -q tasks --all ------------------------------------------------------------ All tasks runnable from root project ------------------------------------------------------------ Default tasks: dists Build tasks ----------- clean - Deletes the build directory (build) api:clean - Deletes the build directory (build) webapp:clean - Deletes the build directory (build) dists - Builds the distribution [api:libs, webapp:libs] docs - Builds the documentation api:libs - Builds the JAR api:compile - Compiles the source files webapp:libs - Builds the JAR [api:libs] webapp:compile - Compiles the source files Build Setup tasks ----------------- init - Initializes a new Gradle build. [incubating] wrapper - Generates Gradle wrapper files. [incubating] Help tasks ---------- components - Displays the components produced by root project 'projectReports'. [incubating] api:components - Displays the components produced by project ':api'. [incubating] webapp:components - Displays the components produced by project ':webapp'. [incubating] dependencies - Displays all dependencies declared in root project 'projectReports'. api:dependencies - Displays all dependencies declared in project ':api'. webapp:dependencies - Displays all dependencies declared in project ':webapp'. dependencyInsight - Displays the insight into a specific dependency in root project 'projectReports'. api:dependencyInsight - Displays the insight into a specific dependency in project ':api'. webapp:dependencyInsight - Displays the insight into a specific dependency in project ':webapp'. help - Displays a help message. api:help - Displays a help message. webapp:help - Displays a help message. projects - Displays the sub-projects of root project 'projectReports'. api:projects - Displays the sub-projects of project ':api'. webapp:projects - Displays the sub-projects of project ':webapp'. properties - Displays the properties of root project 'projectReports'. api:properties - Displays the properties of project ':api'. webapp:properties - Displays the properties of project ':webapp'. tasks - Displays the tasks runnable from root project 'projectReports' (some of the displayed tasks may belong to subprojects). api:tasks - Displays the tasks runnable from project ':api'. webapp:tasks - Displays the tasks runnable from project ':webapp'. ~~~ ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1163-show-task-usage-details-显示-task-使用细节)11.6.3\. Show task usage details 显示 task 使用细节 执行 gradle help --task someTask 可以获取到 task 的详细信息, 或者多项目构建中相同 task 名称的所有 task 的信息,如下 Example 11.12\. Obtaining detailed help for tasks 执行 gradle -q help --task libs 输出 ~~~ > gradle -q help --task libs Detailed task information for libs Paths :api:libs :webapp:libs Type Task (org.gradle.api.Task) Description Builds the JAR ~~~ 这些结果包含了完整的 task 的路径、类型、可能的命令行选项以及描述信息等. ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1164-listing-project-dependencies-依赖列表)11.6.4\. Listing project dependencies 依赖列表 执行 gradle dependencies 会列出项目的依赖列表,所有依赖会根据任务区分,以树型结构展示出来。如下 Example 11.13\. Obtaining information about dependencies 执行 gradle -q dependencies api:dependencies webapp:dependencies 输出 ~~~ > gradle -q dependencies api:dependencies webapp:dependencies ------------------------------------------------------------ Root project ------------------------------------------------------------ No configurations ------------------------------------------------------------ Project :api - The shared API for the application ------------------------------------------------------------ compile \--- org.codehaus.groovy:groovy-all:2.3.6 testCompile \--- junit:junit:4.11 \--- org.hamcrest:hamcrest-core:1.3 ------------------------------------------------------------ Project :webapp - The Web application implementation ------------------------------------------------------------ compile +--- project :api | \--- org.codehaus.groovy:groovy-all:2.3.6 \--- commons-io:commons-io:1.2 testCompile No dependencies ~~~ 由于依赖的报告可以变得较大,可以使用特定的配置来限制到一个有用的报告。可以通过 --configuration 可选参数来实现。 Example 11.14\. Filtering dependency report by configuration 执行 gradle -q api:dependencies --configuration testCompile 输出为 ~~~ > gradle -q api:dependencies --configuration testCompile ------------------------------------------------------------ Project :api - The shared API for the application ------------------------------------------------------------ testCompile \--- junit:junit:4.11 \--- org.hamcrest:hamcrest-core:1.3 ~~~ ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1165-getting-the-insight-into-a-particular-dependency-查看特定依赖)11.6.5\. Getting the insight into a particular dependency 查看特定依赖 执行 gradle dependencyInsight 可以查看指定的依赖情况,如下 Example 11.15\. Getting the insight into a particular dependency 执行 gradle -q webapp:dependencyInsight --dependency groovy --configuration compile 输出 ~~~ > gradle -q webapp:dependencyInsight --dependency groovy --configuration compile org.codehaus.groovy:groovy-all:2.3.6 \--- project :api \--- compile ~~~ 这对于分辨依赖、了解依赖关系、了解为何选择此版本作为依赖十分有用。了解更多请参阅 [DependencyInsightReportTask](http://www.gradle.org/docs/current/dsl/org.gradle.api.tasks.diagnostics.DependencyInsightReportTask.html)类的 API 内建的 dependencyInsight 是'Help' task 分组中的一个。这项 task 需要进行依赖和配置文件的配置才可以。该报告寻找那些与定依赖规范指定的配置匹配的的依赖。如果应用了 Java 相关的插件,该dependencyinsight task 是预先经过 'compile' 配置,因为它通常依赖我们感兴趣的编译。你应该指定您感兴趣的依赖,通过命令行 '--dependency'选项。如果你不喜欢默认的,你可以选择通过 '--configuration' 选项来配置。更多信息见[DependencyInsightReportTask](http://www.gradle.org/docs/current/dsl/org.gradle.api.tasks.diagnostics.DependencyInsightReportTask.html) 类的API文档。 ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1166-listing-project-properties-项目属性列表)11.6.6\. Listing project properties 项目属性列表 执行 gradle properties 可以获取项目所有属性列表,如下 Example 11.16\. Information about properties 执行 gradle -q api:properties 输出 ~~~ > gradle -q api:properties ------------------------------------------------------------ Project :api - The shared API for the application ------------------------------------------------------------ allprojects: [project ':api'] ant: org.gradle.api.internal.project.DefaultAntBuilder@12345 antBuilderFactory: org.gradle.api.internal.project.DefaultAntBuilderFactory@12345 artifacts: org.gradle.api.internal.artifacts.dsl.DefaultArtifactHandler_Decorated@12345 asDynamicObject: org.gradle.api.internal.ExtensibleDynamicObject@12345 baseClassLoaderScope: org.gradle.api.internal.initialization.DefaultClassLoaderScope@12345 buildDir: /home/user/gradle/samples/userguide/tutorial/projectReports/api/build buildFile: /home/user/gradle/samples/userguide/tutorial/projectReports/api/build.gradle ~~~ ### [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#1167-profiling-a-build)11.6.7\. Profiling a build --profile 命令选项可以记录一些构建期间的信息并保存到 build/reports/profile 目录下并且以构建时间命名这些文件 该报告列出总时间和在配置和 task 的执行 阶段的细节。并以时间大小倒序排列,并且记录了任务的执行情况 如果采用了 buildSrc 构建,那么在 buildSrc/build 下同时也会给 buildSrc 生成一份日志记录 [![](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2015-08-19_55d480aacedc5.jpg)](https://docs.gechiui.com/gc-content/uploads/sites/kancloud/2015-08-19_55d480aacedc5.jpg) ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#117-dry-run-干跑)11.7\. Dry Run 干跑 有时可能你只想知道某个 task 在一个 task 集中按顺序执行的结果,但并不想实际执行这些 task 。那么你可以用 -m 选项。例如 执行 `gradle -m clean compile` 将会看到所有的作为 clean 和 compile 一部分的 task 会被执行。这与 task 可以形成互补,让你知道哪些 task 可以用于执行。 ## [](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Chapter%2011.%20Using%20the%20Gradle%20Command-Line%20%E4%BD%BF%E7%94%A8%20Gradle%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md#118-summary-总结)11.8\. Summary 总结 本章看到了命令行的一部分。更多详见 [Appendix D. Gradle Command Line 命令行](https://github.com/waylau/Gradle-2-User-Guide/blob/master/Appendix%20D.%20Gradle%20Command%20Line%20%E5%91%BD%E4%BB%A4%E8%A1%8C.md)
';